When a landlord has a rental property in Commercial Point and the tenant calls about no heat, the problem cannot wait. When a property manager is looking after a unit they do not live in and the air conditioner stops running in the middle of summer, they need someone who can scope the job on the phone and get a visit on the calendar without delay. That is the kind of call we take, and it is the kind of call that shapes how we work.
We cover the full range of heating and cooling work in Commercial Point and across Pickaway County: repair, maintenance, installation, and full system replacement for homes and managed properties alike. We are available every day from 9:00 AM to 11:00 PM, and emergency no-heat and no-cool calls are taken seriously regardless of where they fall in the day.
When the heat or the AC quits, the first question is always how soon someone can be out. When you call, someone who knows the trade picks up and scopes the job on the phone. You get a price for the visit before anything is scheduled, and the appointment is arranged from there. There is no voicemail queue and no callback to wait on.
Emergency no-heat and no-cool calls get treated as a priority. A property without heat in a cold stretch or without cooling during a humid summer stretch is not a situation to leave on a list. We take those calls up to 11:00 PM every day of the week.
For tenants who need to stay in a unit or a small business that cannot close for the day, we work around what the schedule allows. The scope and the timing are settled on the call so you know what to expect before anyone arrives. We keep you posted from the first call until your system's running again.
Efficiency ratings describe how a piece of equipment performs under controlled test conditions. What a property actually sees once the system is installed and running depends on more than the number on the label.
Duct condition matters. A system rated for high efficiency loses a significant share of that performance if the ductwork it pushes air through is leaking at joints or undersized for the load. Refrigerant charge matters too. A system running slightly low on refrigerant works harder to move the same amount of heat and draws more power doing it. Equipment sizing matters most of all. An oversized unit short-cycles before it has a chance to pull humidity out of the air, which is a real problem in this region's summers. An undersized unit runs constantly without satisfying the set point.
A proper installation accounts for all of those. Load calculation determines the right equipment size for the space, not just a one-to-one swap with whatever came out. The system is tested before the visit ends to confirm it is performing as expected, not just that it turns on.
Homes in this part of Ohio need both heating and cooling to handle the full range of what the seasons bring. The furnace-and-central-air pairing remains the most common setup, and when one side of that system reaches the end of its useful life, replacing both at the same time often makes more sense than replacing one and leaving an aging unit on the other side. Efficiency gains on a new furnace are partially offset when the AC it connects to is a decade old and running below its rated capacity.
Heat pump adoption has been rising across this region, and for good reason. A heat pump handles both heating and cooling from a single outdoor unit, which simplifies the system and reduces the number of components that can fail. Cold-climate models have extended the effective heating range well below what older heat pump technology could manage. For a property replacing aging equipment, a heat pump installation is worth including in the conversation about what goes in next.
The price for a service call or diagnostic visit is confirmed on the phone before anything is scheduled. What the repair or replacement actually costs depends on what the diagnostic finds, and those details are explained before any work is authorized.
Several things move a quote. The fault itself matters: a failed capacitor on the outdoor unit is a different job from a refrigerant leak that requires leak diagnosis, evacuation, and recharge. Access matters too. Equipment in a tight crawl space or a confined mechanical room takes longer to work on than a unit sitting in an open basement. Whether a repair is the right call or a replacement is the better answer also affects the total, and we explain that tradeoff after the diagnostic so you can make the decision with the full picture.
Nothing is authorized after the fact. The scope and the cost are agreed before work begins, and any finding that changes the scope is discussed before the additional work proceeds.
A duct system that is leaking or poorly laid out sends conditioned air into wall cavities, attic spaces, and unconditioned areas instead of into the rooms where it belongs. The equipment runs longer to compensate, energy use climbs, and the rooms at the far end of the run stay uncomfortable regardless of what the thermostat says.
Duct repair and sealing addresses those losses without pulling the house apart. Leaks at joints and connections are the most common source of the problem, and sealing them improves airflow distribution across the whole system. In older homes in this area, ductwork was often sized for equipment that has since been replaced with a unit of different capacity, which creates airflow imbalances the equipment cannot overcome on its own.
Zoning and comfort-control systems are another option for properties where certain rooms consistently run too hot or too cold. A zoned system uses dampers in the ductwork to direct airflow where it is needed rather than treating the whole house as a single space. It does not require new ductwork in most cases, and it works alongside existing equipment.
A thermostat that is reading the temperature wrong, failing to hold a set point, or not communicating with the air handler causes the system to behave in ways that look like equipment failure. Before a diagnostic visit concludes there is a mechanical problem, the control side of the system gets checked. Smart thermostat installation is a straightforward upgrade in most cases and adds scheduling flexibility and remote monitoring without requiring new HVAC equipment. For landlords managing a property remotely, a connected thermostat also means visibility into what the system is doing between visits.
An air conditioner or furnace that runs without reaching the set temperature is telling you something. The cause could be an undersized system, a refrigerant charge that has dropped below the correct level, a coil that has accumulated enough buildup to restrict heat transfer, or ductwork that is losing conditioned air before it reaches the rooms. Each of those points to a different fix. A diagnostic visit identifies which one is actually responsible rather than replacing parts on a guess.
A burning smell at startup can come from dust burning off a heat exchanger that has sat idle, or from a motor that is working harder than it should. A musty smell usually points to microbial growth on the evaporator coil or in the ductwork, which spreads through the air every time the system runs. Neither should be ignored. If a smell is coming from the system, the right call is to stop running it and get a diagnostic scheduled.
A cracked heat exchanger is one of the more serious findings a furnace diagnostic can turn up. The heat exchanger separates the combustion gases from the air that circulates through the home. When it cracks, those gases can enter the airstream. The inspection involves a visual check of the exchanger surface and a test of the combustion side under operating conditions. It is part of a furnace diagnostic visit, not a separate service.
Standing water near an air handler or furnace usually points to a blocked or disconnected condensate drain. The indoor coil removes moisture from the air as it cools, and that moisture drains away through a condensate line. When the line is clogged or the trap is dry, water backs up and pools around the unit. Left unaddressed, it can damage the air handler, the surrounding structure, and anything stored nearby. Clearing the drain and checking the condensate handling is part of a standard service visit.
We serve Commercial Point and the surrounding Pickaway County area, including Scioto Township, Lockbourne, South Bloomfield, Ashville, and the communities along the county line toward Grove City. The full range of heating and cooling work, repair, maintenance, installation, and replacement, is available across that area for both residential and managed properties.
If you are not sure whether your address falls within our service area, call and ask. You will get a straight answer. If the scope is still open, the heating and cooling services page is the place to start.
A rattle usually means something is loose, whether that is a panel, a blower component, or debris that has made its way into the unit. A squeal most often points to a worn belt on older equipment or a bearing in the blower motor that is failing. Both are worth addressing before the component fails completely, because a secondary failure can turn a minor repair into a larger one.
Yes.
Property managers who want tenants to be able to call directly can pass along (380) 979-9289.
When a tenant calls, the same process applies: the job is scoped on the phone, the price is confirmed, and the visit is scheduled.
That is a question to raise on the call when the work is being scoped. How invoicing is handled for multiple properties depends on the arrangement, and we work out the details before the visits are scheduled.
Yes. When you call, someone who knows the trade picks up, not a general scheduling line. They can ask the right questions about what the system is doing, help narrow down what the visit should cover, and give you a price for the service call before anything is booked. That conversation is part of how the job gets scoped correctly.
Call us and describe what the system is doing. A recurring problem after a repair usually means either a second underlying fault that was not visible during the first visit or a component that failed sooner than expected. We will schedule a follow-up diagnostic and look at what the system is actually doing rather than assuming the original repair is still holding.
The outdoor unit needs clear working space around it for both the visit and for the system to operate correctly. If overgrowth is blocking the condenser, clearing it before the visit is worth doing. A condenser that cannot move air freely runs less efficiently and is harder to assess accurately.
It does not. We cover Commercial Point and the surrounding Pickaway County communities, including Scioto Township, Lockbourne, South Bloomfield, and Ashville. Coverage is not limited to one county, and a call from this area is handled the same way as any other.
If the furnace, the air conditioner, the heat pump, or the ductwork in your Commercial Point property needs attention, call us at (380) 979-9289. We are available every day from 9:00 AM to 11:00 PM.
One call. One clear diagnosis. One price, agreed first.
Tell us what the system is doing and we will come out and look at it.
We serve these towns nearby as well: Scioto Township, Ashville, Groveport, Pleasant Township, Circleville. View our coverage list.
Heating and cooling work covers a wide range of jobs, and knowing what each service involves helps you call with confidence. Below is a plain-language look at what we handle for homes and businesses in Commercial Point and across Pickaway County. Every row reflects work we take on regularly, and every job starts the same way: a clear explanation of what the system needs before anything is authorized.
| Service | What It Covers | When You Need It | Helpful Details |
|---|---|---|---|
| Emergency HVAC Service |
| Any home or property where the heating or cooling system has stopped working entirely | We take emergency calls every day from 9:00 AM to 11:00 PM. A no-heat or no-cool call is not treated as a low-priority item. |
| Full System Installation & Replacement |
| Homeowners replacing aging or repeatedly failing equipment, or adding HVAC to a new space | Pairing a new furnace with a new AC unit at the same time is common in this area and often makes sense on both cost and efficiency grounds. |
| Seasonal Maintenance & Tune-Ups |
| Homeowners who want the system checked before peak heating or cooling season | Seasonal maintenance is scheduled around your calendar. Calling before the peak season means the system is ready before it is under full demand. |
Call (380) 979-9289 to talk through what your system needs and get a quote before anything is scheduled.
(380) 979-9289